หน้าแรก › สินค้า › KAT Series

รายละเอียดสินค้า

โซลูชั่นระบบระบายอากาศคุณภาพ สำหรับทุกอุตสาหกรรม

KRUGER

KAT Series

KAT Series - Double Inlet Centrifugal Fans - Forward Curved

Airflow (ปริมาณลม)Capacities to 25,000 m3/h
Static Pressure (แรงดันลม)Total pressure up to 1700 Pa
Diameter (ขนาดใบพัด)Size from 7 to 18 inches
Application (การใช้งาน)For supply or exhaust application in commercial, institutions and industrial HVAC systems.
♧

ปริมาณลมสูง

ระบายอากาศได้อย่างมีประสิทธิภาพ

⚙

โครงสร้างแข็งแรง ทนทาน

ผลิตจากวัสดุคุณภาพสูง

♢

ประหยัดพลังงาน

ออกแบบเพื่อประสิทธิภาพ

⚒

ติดตั้งและบำรุงรักษาง่าย

รองรับการใช้งานหลากหลาย

▥

เหมาะสำหรับอุตสาหกรรม

รองรับการใช้งานในโรงงาน

KRUGER KAT Series

KAT Series – Double Inlet Centrifugal Fans – Forward Curved

Overview

The KAT series is DIDW centrifugal fan with forward curved (FC) impellers. The fans are suitable for supply and exhaust applications in commercial, process and industrial HVAC systems. Ranges KAT-9/7 to KAT 18-18 are AMCA certified to Air, Sound and FEG.

The KAT series is available in Type S and C.

KAT series is also available in twin fan version with two double inlet fans mounted on the same shaft.

KAT fans are operated at relatively low speeds and are used to deliver large air volumes against relatively low static pressures. The inherently light construction of the forward curved wheel does not permit it to be operated at speeds needed to generate high static pressure.

The typical application range of this type of fan is from 30 to 80% wide open airflow. Selecting an operating point below approximately 30% wide open may place the fan in an area of instability. Similarly, an operating point beyond 80% wide open typically produces noise and inefficiency.

The maximum static efficiency is from approximately 50 to 65% and occurs just to the right of the maximum static-pressure point on the fan performance curve.

Specifications

Quick Facts

• Size from 7 to 18 inches

• Capacities to 25,000 m3/h

• Total pressure up to 1700 Pa

• Suitable for use in packaged unit, AHU, clean room and ventilation

Application

For supply or exhaust application in commercial, institutions and industrial HVAC systems.

Testing

Both air and sound performance ratings are based on test to AMCA210 and AMCA300 Standards.

All wheels are statically and dynamically balanced to ISO1940 and AMCA204 – G2.5 Standards.

เอกสารและแค็ตตาล็อก

ตัวอย่างระบบระบายอากาศในโรงงาน

สินค้าที่เกี่ยวข้อง

PRODUCTS YOU MAY ALSO LIKE

KAT Series แบบขยาย

ต้องการคำแนะนำสินค้า
หรือใบเสนอราคา?

ทีมวิศวกรผู้เชี่ยวชาญพร้อมให้คำปรึกษา
เพื่อหาโซลูชั่นที่เหมาะสมกับความต้องการของคุณ

♧ให้คำปรึกษา
โดยผู้เชี่ยวชาญ
⚙แนะนำสินค้า
ตามความต้องการ
▤ออกแบบระบบ
ระบายอากาศ